MYNN-EDMF PBL and Shallow Convection Module

This scheme (1) performs pre-mynnedmf work, (2) runs the mynnedmf, and (3) performs post-mynnedmf work More...

Modules
module	bl_mynn_common
	This module defines model-specific constants/parameters.

Functions/Subroutines
subroutine	module_bl_mynn::mym_level2 (kts, kte, dz, u, v, thl, thetav, qw, ql, vt, vq, dtl, dqw, dtv, gm, gh, sm, sh)
	This subroutine calculates the level 2, non-dimensional wind shear \(G_M\) and vertical temperature gradient \(G_H\) as well as the level 2 stability funcitons \(S_h\) and \(S_m\).
subroutine	module_bl_mynn::mym_length (kts, kte, xland, dz, dx, zw, rmo, flt, fltv, flq, vt, vq, u1, v1, qke, dtv, el, zi, theta, qkw, psig_bl, cldfra_bl1d, bl_mynn_mixlength, edmf_w1, edmf_a1)
	This subroutine calculates the mixing lengths.
subroutine	module_bl_mynn::boulac_length0 (k, kts, kte, zw, dz, qtke, theta, lb1, lb2)
	This subroutine was taken from the BouLac scheme in WRF-ARW and modified for integration into the MYNN PBL scheme. WHILE loops were added to reduce the computational expense. This subroutine computes the length scales up and down and then computes the min, average of the up/down length scales, and also considers the distance to the surface.
subroutine	module_bl_mynn::boulac_length (kts, kte, zw, dz, qtke, theta, lb1, lb2)
	This subroutine was taken from the BouLac scheme in WRF-ARW and modified for integration into the MYNN PBL scheme. WHILE loops were added to reduce the computational expense. This subroutine computes the length scales up and down and then computes the min, average of the up/down length scales, and also considers the distance to the surface.
subroutine	module_bl_mynn::mym_turbulence (kts, kte, xland, closure, dz, dx, zw, u, v, thl, thetav, ql, qw, qke, tsq, qsq, cov, vt, vq, rmo, flt, fltv, flq, zi, theta, sh, sm, el, dfm, dfh, dfq, tcd, qcd, pdk, pdt, pdq, pdc, qwt1d, qshear1d, qbuoy1d, qdiss1d, tke_budget, psig_bl, psig_shcu, cldfra_bl1d, bl_mynn_mixlength, edmf_w1, edmf_a1, tkeprodtd, spp_pbl, rstoch_col)
	This subroutine calculates the vertical diffusivity coefficients and the production terms for the turbulent quantities.
subroutine	module_bl_mynn::mym_predict (kts, kte, closure, delt, dz, ust, flt, flq, pmz, phh, el, dfq, rho, pdk, pdt, pdq, pdc, qke, tsq, qsq, cov, s_aw, s_awqke, bl_mynn_edmf_tke, qwt1d, qdiss1d, tke_budget)
	This subroutine predicts the turbulent quantities at the next step.
subroutine	module_bl_mynn::mym_condensation (kts, kte, dx, dz, zw, xland, thl, qw, qv, qc, qi, qs, p, exner, tsq, qsq, cov, sh, el, bl_mynn_cloudpdf, qc_bl1d, qi_bl1d, cldfra_bl1d, pblh1, hfx1, vt, vq, th, sgm, rmo, spp_pbl, rstoch_col)
	This subroutine calculates the nonconvective component of the subgrid cloud fraction and mixing ratio as well as the functions used to calculate the buoyancy flux. Different cloud PDFs can be selected by use of the namelist parameter bl_mynn_cloudpdf .
subroutine	module_bl_mynn::mynn_tendencies (kts, kte, i, delt, dz, rho, u, v, th, tk, qv, qc, qi, qs, qnc, qni, psfc, p, exner, thl, sqv, sqc, sqi, sqs, sqw, qnwfa, qnifa, qnbca, ozone, ust, flt, flq, flqv, flqc, wspd, uoce, voce, tsq, qsq, cov, tcd, qcd, dfm, dfh, dfq, du, dv, dth, dqv, dqc, dqi, dqs, dqnc, dqni, dqnwfa, dqnifa, dqnbca, dozone, diss_heat, s_aw, s_awthl, s_awqt, s_awqv, s_awqc, s_awu, s_awv, s_awqnc, s_awqni, s_awqnwfa, s_awqnifa, s_awqnbca, sd_aw, sd_awthl, sd_awqt, sd_awqv, sd_awqc, sd_awu, sd_awv, sub_thl, sub_sqv, sub_u, sub_v, det_thl, det_sqv, det_sqc, det_u, det_v, flag_qc, flag_qi, flag_qnc, flag_qni, flag_qs, flag_qnwfa, flag_qnifa, flag_qnbca, cldfra_bl1d, bl_mynn_cloudmix, bl_mynn_mixqt, bl_mynn_edmf, bl_mynn_edmf_mom, bl_mynn_mixscalars)
	This subroutine solves for tendencies of U, V, \(\theta\), qv, qc, and qi.
subroutine	module_bl_mynn::retrieve_exchange_coeffs (kts, kte, dfm, dfh, dz, k_m, k_h)
subroutine	module_bl_mynn::tridiag (n, a, b, c, d)
subroutine	module_bl_mynn::tridiag2 (n, a, b, c, d, x)
subroutine	module_bl_mynn::tridiag3 (kte, a, b, c, d, x)
subroutine	module_bl_mynn::dmp_mf (kts, kte, dt, zw, dz, p, rho, momentum_opt, tke_opt, scalar_opt, u, v, w, th, thl, thv, tk, qt, qv, qc, qke, qnc, qni, qnwfa, qnifa, qnbca, exner, vt, vq, sgm, ust, flt, fltv, flq, flqv, pblh, kpbl, dx, landsea, ts, edmf_a, edmf_w, edmf_qt, edmf_thl, edmf_ent, edmf_qc, s_aw, s_awthl, s_awqt, s_awqv, s_awqc, s_awu, s_awv, s_awqke, s_awqnc, s_awqni, s_awqnwfa, s_awqnifa, s_awqnbca, sub_thl, sub_sqv, sub_u, sub_v, det_thl, det_sqv, det_sqc, det_u, det_v, nchem, chem1, s_awchem, mix_chem, qc_bl1d, cldfra_bl1d, qc_bl1d_old, cldfra_bl1d_old, f_qc, f_qi, f_qnc, f_qni, f_qnwfa, f_qnifa, f_qnbca, psig_shcu, maxwidth, ktop, maxmf, ztop, spp_pbl, rstoch_col)
	This subroutine is the Dynamic Multi-Plume (DMP) Mass-Flux Scheme.
subroutine	module_bl_mynn::condensation_edmf (qt, thl, p, zagl, thv, qc)
	This subroutine.
real(kind_phys) function	module_bl_mynn::esat_blend (t)
real(kind_phys) function	module_bl_mynn::qsat_blend (t, p)
	This function extends function "esat" and returns a "blended" saturation mixing ratio. Tice currently set to 240 K, t0c = 273.15 K.
real(kind_phys) function	module_bl_mynn::xl_blend (t)
	This function interpolates the latent heats of vaporization and sublimation into a single, temperature-dependent, "blended" value, following Chaboureau and Bechtold (2002) [17], Appendix.
subroutine	module_bl_mynn::mynn_bl_driver (initflag, restart, cycling, delt, dz, dx, znt, u, v, w, th, sqv3d, sqc3d, sqi3d, sqs3d, qnc, qni, qnwfa, qnifa, qnbca, ozone, p, exner, rho, t3d, xland, ts, qsfc, ps, ust, ch, hfx, qfx, rmol, wspd, uoce, voce, qke, qke_adv, sh3d, sm3d, nchem, kdvel, ndvel, chem3d, vdep, smoke_dbg, frp, emis_ant_no, mix_chem, enh_mix, rrfs_sd, tsq, qsq, cov, rublten, rvblten, rthblten, rqvblten, rqcblten, rqiblten, rqncblten, rqniblten, rqsblten, rqnwfablten, rqnifablten, rqnbcablten, dozone, exch_h, exch_m, pblh, kpbl, el_pbl, dqke, qwt, qshear, qbuoy, qdiss, qc_bl, qi_bl, cldfra_bl, bl_mynn_tkeadvect, tke_budget, bl_mynn_cloudpdf, bl_mynn_mixlength, icloud_bl, closure, bl_mynn_edmf, bl_mynn_edmf_mom, bl_mynn_edmf_tke, bl_mynn_mixscalars, bl_mynn_output, bl_mynn_cloudmix, bl_mynn_mixqt, edmf_a, edmf_w, edmf_qt, edmf_thl, edmf_ent, edmf_qc, sub_thl3d, sub_sqv3d, det_thl3d, det_sqv3d, maxwidth, maxmf, ztop_plume, ktop_plume, spp_pbl, pattern_spp_pbl, rthraten, flag_qc, flag_qi, flag_qnc, flag_qni, flag_qs, flag_qnwfa, flag_qnifa, flag_qnbca, flag_ozone, ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, its, ite, jts, jte, kts, kte)
	This subroutine is the MYNN-EDNF PBL driver routine,which encompassed the majority of the subroutines that comprise the procedures that ultimately solve for tendencies of \(U, V, \theta, q_v, q_c, and q_i\).
subroutine	module_bl_mynn::mym_initialize (kts, kte, xland, dz, dx, zw, u, v, thl, qw, zi, theta, thetav, sh, sm, ust, rmo, el, qke, tsq, qsq, cov, psig_bl, cldfra_bl1d, bl_mynn_mixlength, edmf_w1, edmf_a1, initialize_qke, spp_pbl, rstoch_col)
	This subroutine initializes the mixing length, TKE, \(\theta^{'2}\), \(q^{'2}\), and \(\theta^{'}q^{'}\).
subroutine	module_bl_mynn::get_pblh (kts, kte, zi, thetav1d, qke1d, zw1d, dz1d, landsea, kzi)
	This subroutine calculates hybrid diagnotic boundary-layer height (PBLH).

Detailed Description

Argument Table