module_bl_mynn Module Reference

Functions/Subroutines
subroutine	mym_level2 (kts, kte, dz, u, v, thl, thetav, qw, ql, vt, vq, dtl, dqw, dtv, gm, gh, sm, sh)
	This subroutine calculates the level 2, non-dimensional wind shear \(G_M\) and vertical temperature gradient \(G_H\) as well as the level 2 stability funcitons \(S_h\) and \(S_m\). More...
subroutine	mym_length (kts, kte, xland, dz, dx, zw, rmo, flt, fltv, flq, vt, vq, u1, v1, qke, dtv, el, zi, theta, qkw, Psig_bl, cldfra_bl1D, bl_mynn_mixlength, edmf_w1, edmf_a1)
	This subroutine calculates the mixing lengths. More...
subroutine	boulac_length0 (k, kts, kte, zw, dz, qtke, theta, lb1, lb2)
	This subroutine was taken from the BouLac scheme in WRF-ARW and modified for integration into the MYNN PBL scheme. WHILE loops were added to reduce the computational expense. This subroutine computes the length scales up and down and then computes the min, average of the up/down length scales, and also considers the distance to the surface. More...
subroutine	boulac_length (kts, kte, zw, dz, qtke, theta, lb1, lb2)
	This subroutine was taken from the BouLac scheme in WRF-ARW and modified for integration into the MYNN PBL scheme. WHILE loops were added to reduce the computational expense. This subroutine computes the length scales up and down and then computes the min, average of the up/down length scales, and also considers the distance to the surface. More...
subroutine	mym_turbulence (kts, kte, xland, closure, dz, dx, zw, u, v, thl, thetav, ql, qw, qke, tsq, qsq, cov, vt, vq, rmo, flt, fltv, flq, zi, theta, sh, sm, El, Dfm, Dfh, Dfq, Tcd, Qcd, Pdk, Pdt, Pdq, Pdc, qWT1D, qSHEAR1D, qBUOY1D, qDISS1D, tke_budget, Psig_bl, Psig_shcu, cldfra_bl1D, bl_mynn_mixlength, edmf_w1, edmf_a1, TKEprodTD, spp_pbl, rstoch_col)
	This subroutine calculates the vertical diffusivity coefficients and the production terms for the turbulent quantities. More...
subroutine	mym_predict (kts, kte, closure, delt, dz, ust, flt, flq, pmz, phh, el, dfq, rho, pdk, pdt, pdq, pdc, qke, tsq, qsq, cov, s_aw, s_awqke, bl_mynn_edmf_tke, qWT1D, qDISS1D, tke_budget)
	This subroutine predicts the turbulent quantities at the next step. More...
subroutine	mym_condensation (kts, kte, dx, dz, zw, xland, thl, qw, qv, qc, qi, qs, p, exner, tsq, qsq, cov, Sh, el, bl_mynn_cloudpdf, qc_bl1D, qi_bl1D, cldfra_bl1D, PBLH1, HFX1, Vt, Vq, th, sgm, rmo, spp_pbl, rstoch_col)
	This subroutine calculates the nonconvective component of the subgrid cloud fraction and mixing ratio as well as the functions used to calculate the buoyancy flux. Different cloud PDFs can be selected by use of the namelist parameter bl_mynn_cloudpdf . More...
subroutine	mynn_tendencies (kts, kte, i, delt, dz, rho, u, v, th, tk, qv, qc, qi, qs, qnc, qni, psfc, p, exner, thl, sqv, sqc, sqi, sqs, sqw, qnwfa, qnifa, qnbca, ozone, ust, flt, flq, flqv, flqc, wspd, uoce, voce, tsq, qsq, cov, tcd, qcd, dfm, dfh, dfq, Du, Dv, Dth, Dqv, Dqc, Dqi, Dqs, Dqnc, Dqni, Dqnwfa, Dqnifa, Dqnbca, Dozone, diss_heat, s_aw, s_awthl, s_awqt, s_awqv, s_awqc, s_awu, s_awv, s_awqnc, s_awqni, s_awqnwfa, s_awqnifa, s_awqnbca, sd_aw, sd_awthl, sd_awqt, sd_awqv, sd_awqc, sd_awu, sd_awv, sub_thl, sub_sqv, sub_u, sub_v, det_thl, det_sqv, det_sqc, det_u, det_v, FLAG_QC, FLAG_QI, FLAG_QNC, FLAG_QNI, FLAG_QS, FLAG_QNWFA, FLAG_QNIFA, FLAG_QNBCA, cldfra_bl1d, bl_mynn_cloudmix, bl_mynn_mixqt, bl_mynn_edmf, bl_mynn_edmf_mom, bl_mynn_mixscalars)
	This subroutine solves for tendencies of U, V, \(\theta\), qv, qc, and qi. More...
subroutine	moisture_check (kte, delt, dp, exner, qv, qc, qi, qs, th, dqv, dqc, dqi, dqs, dth)
subroutine	mynn_mix_chem (kts, kte, i, delt, dz, pblh, nchem, kdvel, ndvel, chem1, vd1, rho, flt, tcd, qcd, dfh, s_aw, s_awchem, emis_ant_no, frp, rrfs_sd, enh_mix, smoke_dbg)
subroutine	retrieve_exchange_coeffs (kts, kte, dfm, dfh, dz, K_m, K_h)
subroutine	tridiag (n, a, b, c, d)
subroutine	tridiag2 (n, a, b, c, d, x)
subroutine	tridiag3 (kte, a, b, c, d, x)
subroutine	dmp_mf (kts, kte, dt, zw, dz, p, rho, momentum_opt, tke_opt, scalar_opt, u, v, w, th, thl, thv, tk, qt, qv, qc, qke, qnc, qni, qnwfa, qnifa, qnbca, exner, vt, vq, sgm, ust, flt, fltv, flq, flqv, pblh, kpbl, dx, landsea, ts, edmf_a, edmf_w, edmf_qt, edmf_thl, edmf_ent, edmf_qc, s_aw, s_awthl, s_awqt, s_awqv, s_awqc, s_awu, s_awv, s_awqke, s_awqnc, s_awqni, s_awqnwfa, s_awqnifa, s_awqnbca, sub_thl, sub_sqv, sub_u, sub_v, det_thl, det_sqv, det_sqc, det_u, det_v, nchem, chem1, s_awchem, mix_chem, qc_bl1d, cldfra_bl1d, qc_bl1D_old, cldfra_bl1D_old, F_QC, F_QI, F_QNC, F_QNI, F_QNWFA, F_QNIFA, F_QNBCA, Psig_shcu, nup2, ktop, maxmf, ztop, spp_pbl, rstoch_col)
	This subroutine is the Dynamic Multi-Plume (DMP) Mass-Flux Scheme. More...
subroutine	condensation_edmf (QT, THL, P, zagl, THV, QC)
	This subroutine. More...
subroutine	condensation_edmf_r (QT, THL, P, zagl, THV, QC)
subroutine	ddmf_jpl (kts, kte, dt, zw, dz, p, u, v, th, thl, thv, tk, qt, qv, qc, rho, exner, ust, wthl, wqt, pblh, kpbl, edmf_a_dd, edmf_w_dd, edmf_qt_dd, edmf_thl_dd, edmf_ent_dd, edmf_qc_dd, sd_aw, sd_awthl, sd_awqt, sd_awqv, sd_awqc, sd_awu, sd_awv, sd_awqke, qc_bl1d, cldfra_bl1d, rthraten)
subroutine	scale_aware (dx, PBL1, Psig_bl, Psig_shcu)
real(kind_phys) function	esat_blend (t)
real(kind_phys) function	qsat_blend (t, P)
	This function extends function "esat" and returns a "blended" saturation mixing ratio. Tice currently set to 240 K, t0c = 273.15 K. More...
real(kind_phys) function	xl_blend (t)
	This function interpolates the latent heats of vaporization and sublimation into a single, temperature-dependent, "blended" value, following Chaboureau and Bechtold (2002) [34], Appendix. More...
real(kind_phys) function	phim (zet)
real(kind_phys) function	phih (zet)
subroutine	topdown_cloudrad (kts, kte, dz1, zw, xland, kpbl, PBLH, sqc, sqi, sqw, thl, th1, ex1, p1, rho1, thetav, cldfra_bl1D, rthraten, maxKHtopdown, KHtopdown, TKEprodTD)
subroutine	mynn_bl_driver (initflag, restart, cycling, delt, dz, dx, znt, u, v, w, th, sqv3d, sqc3d, sqi3d, sqs3d, qnc, qni, qnwfa, qnifa, qnbca, ozone, p, exner, rho, t3d, xland, ts, qsfc, ps, ust, ch, hfx, qfx, rmol, wspd, uoce, voce, qke, qke_adv, sh3d, sm3d, nchem, kdvel, ndvel, chem3d, vdep, smoke_dbg, frp, emis_ant_no, mix_chem, enh_mix, rrfs_sd, tsq, qsq, cov, rublten, rvblten, rthblten, rqvblten, rqcblten, rqiblten, rqncblten, rqniblten, rqsblten, rqnwfablten, rqnifablten, rqnbcablten, dozone, exch_h, exch_m, pblh, kpbl, el_pbl, dqke, qwt, qshear, qbuoy, qdiss, qc_bl, qi_bl, cldfra_bl, bl_mynn_tkeadvect, tke_budget, bl_mynn_cloudpdf, bl_mynn_mixlength, icloud_bl, closure, bl_mynn_edmf, bl_mynn_edmf_mom, bl_mynn_edmf_tke, bl_mynn_mixscalars, bl_mynn_output, bl_mynn_cloudmix, bl_mynn_mixqt, edmf_a, edmf_w, edmf_qt, edmf_thl, edmf_ent, edmf_qc, sub_thl3D, sub_sqv3D, det_thl3D, det_sqv3D, nupdraft, maxMF, ktop_plume, spp_pbl, pattern_spp_pbl, rthraten, FLAG_QC, FLAG_QI, FLAG_QNC, FLAG_QNI, FLAG_QS, FLAG_QNWFA, FLAG_QNIFA, FLAG_QNBCA, FLAG_OZONE, IDS, IDE, JDS, JDE, KDS, KDE, IMS, IME, JMS, JME, KMS, KME, ITS, ITE, JTS, JTE, KTS, KTE)
	This subroutine is the GSD MYNN-EDNF PBL driver routine,which encompassed the majority of the subroutines that comprise the procedures that ultimately solve for tendencies of \(U, V, \theta, q_v, q_c, and q_i\). More...
subroutine	mym_initialize (kts, kte, xland, dz, dx, zw, u, v, thl, qw, zi, theta, thetav, sh, sm, ust, rmo, el, Qke, Tsq, Qsq, Cov, Psig_bl, cldfra_bl1D, bl_mynn_mixlength, edmf_w1, edmf_a1, INITIALIZE_QKE, spp_pbl, rstoch_col)
	This subroutine initializes the mixing length, TKE, \(\theta^{'2}\), \(q^{'2}\), and \(\theta^{'}q^{'}\). More...
subroutine	get_pblh (KTS, KTE, zi, thetav1D, qke1D, zw1D, dz1D, landsea, kzi)
	This subroutine calculates hybrid diagnotic boundary-layer height (PBLH). More...

Variables
real(kind_phys), parameter	cphm_st =5.0
real(kind_phys), parameter	cphm_unst =16.0
real(kind_phys), parameter	cphh_st =5.0
real(kind_phys), parameter	cphh_unst =16.0
real(kind_phys), parameter	pr = 0.74
real(kind_phys), parameter	g1 = 0.235
real(kind_phys), parameter	b1 = 24.0
real(kind_phys), parameter	b2 = 15.0
real(kind_phys), parameter	c2 = 0.729
real(kind_phys), parameter	c3 = 0.340
real(kind_phys), parameter	c4 = 0.0
real(kind_phys), parameter	c5 = 0.2
real(kind_phys), parameter	a1 = b1*( 1.0-3.0*g1 )/6.0
real(kind_phys), parameter	c1 = g1 -1.0/( 3.0*a1*2.88449914061481660)
real(kind_phys), parameter	a2 = a1*( g1-c1 )/( g1*pr )
real(kind_phys), parameter	g2 = b2/b1*( 1.0-c3 ) +2.0*a1/b1*( 3.0-2.0*c2 )
real(kind_phys), parameter	cc2 = 1.0-c2
real(kind_phys), parameter	cc3 = 1.0-c3
real(kind_phys), parameter	e1c = 3.0*a2*b2*cc3
real(kind_phys), parameter	e2c = 9.0*a1*a2*cc2
real(kind_phys), parameter	e3c = 9.0*a2*a2*cc2*( 1.0-c5 )
real(kind_phys), parameter	e4c = 12.0*a1*a2*cc2
real(kind_phys), parameter	e5c = 6.0*a1*a1
real(kind_phys), parameter	qmin =0.0
real(kind_phys), parameter	zmax =1.0
real(kind_phys), parameter	sqfac =3.0
real(kind_phys), parameter	gpw =5./3.
real(kind_phys), parameter	qcgmin =1.e-8
real(kind_phys), parameter	qkemin =1.e-12
real(kind_phys), parameter	tliq = 269.
real(kind_phys), parameter	rr2 =0.7071068
real(kind_phys), parameter	rrp =0.3989423
real(kind_phys), parameter	ckmod =1.
	Use Canuto/Kitamura mod (remove Ric and negative TKE) (1:yes, 0:no) For more info, see Canuto et al. (2008 JAS) and Kitamura (Journal of the Meteorological Society of Japan, Vol. 88, No. 5, pp. 857-864, 2010). Note that this change required further modification of other parameters above (c2, c3). If you want to remove this option, set c2 and c3 constants (above) back to NN2009 values (see commented out lines next to the parameters above). This only removes the negative TKE problem but does not necessarily improve performance - neutral impact. More...
real(kind_phys), parameter	scaleaware =1.
	Use Ito et al. (2015, BLM) scale-aware (0: no, 1: yes). Note that this also has impacts on the cloud PDF and mass-flux scheme, using Honnert et al. (2011) similarity function for TKE in the upper PBL/cloud layer. More...
integer, parameter	bl_mynn_topdown = 0
	Of the following the options, use one OR the other, not both. Adding top-down diffusion driven by cloud-top radiative cooling. More...
integer, parameter	bl_mynn_edmf_dd = 0
	Option to activate downdrafts, from Elynn Wu (0: deactive, 1: active) More...
integer, parameter	dheat_opt = 1
	Option to activate heating due to dissipation of TKE (to activate, set to 1.0) More...
logical, parameter	env_subs = .false.
integer, parameter	bl_mynn_stfunc = 1
logical, parameter	debug_code = .false.
integer, parameter	idbg = 23
integer	mynn_level